2020 Tech Report Jan-Feb

Task # 3.c.: Returning an Alternate Control Group Configuration to Service

ACTION

COMMENT

NOTE: Log entries must contain the name of the person making the entry, as well as the time, date, and pertinent details. Be Specific!

15.

Log “Control group ______ ( insert the appropriate valve number ) has been re- turned to normal operation” in Master Maintenance Log and Daily Rounds Log.

4. Concluding Refrigeration System Strainer Cleaning STEP ACTION COMMENT 1. Restore allowable vehicular and pe- destrian traffic in your work area. 2. Complete an entry in the facility Mas- ter Maintenance Log (or facility equiv- alent), noting the work performed.

If there is not an established Master Mainte- nance Log (or facility equivalent), log the infor- mation on your work order. This includes the shutting down of equipment or any instance where the system is not left in complete functioning condition.

3.

If a system upset occurred, record the details of the event in the Master Main- tenance Log (or facility equivalent) and on your work order. Note if the system was restored to full functionality, and if it was not, explain why in detail. Complete any permits or paperwork required. Return documents such as Standard Operating Procedures (SOP’s) and P&ID’s. Notify your supervisor or facility con- tact of any issues which may need to be addressed. Remove PPE, clean, perform any re- quired preventive maintenance, and stow. Secure all tools and equipment uti- lized.

4.

5.

6.

Notify your supervisor or facility contact of any issues which may need to be addressed.

7.

8.

RETA TECHNICAL REPORT PAGE 26